How to Sew Darts Without Dimples

File 15-08-2017, 16 57 36Darts are one of the things that I’m asked about frequently when I’m teaching dressmaking. How to mark them, sew them and how to avoid getting that little dimple at the end are the most common questions.

So let me explain….

Firstly let’s look at what darts are and what they do.

Where the dart shaping is

 

Darts are a form of “suppression”. That is they   suppress the fabric to create the three-dimensional shape you want to fit around and over the body. Pleats, gathers, tucks are also forms of suppression that allow you to mould and manipulate the fabric to create the shapes you want.

Darts will reduce the fabric from the apex of a curve to the outer edge or in the case of a fishtail or asymmetric darts to an area of ‘fit’. So basically creating shape over your curved bits – bust, buttocks, belly and shoulder blades – those areas really.

 

In flat pattern terms a dart does the same job as a split in a flat piece of paper which when overlapped pushes the centre of the paper up to create a three-dimensional shape.

File 15-08-2017, 15 46 34
Cutting through the paper allows the “dart” to be removed.
File 15-08-2017, 15 46 22
The dart is folded outfit decreases the outer edge causing the middle to lift.

 

 

 

 

 

 

 

Most darts will be marked on the pattern as straight lines.

File 15-08-2017, 15 45 57

However, our bodies are not made up of straight lines. We are a series of curves, some more than most but we are all most definitely not Lego people or Madonna with pointy boobs!

This means that the darts we need should follow the curves of the body. I will explain further once we’ve looked at how to mark out the darts.

Marking Darts

Transferring the dart markings from pattern to fabric can be done in a whole host of different ways. Many people like tailors tacks and admittedly they do have their place in some sewing projects, but coming from industry and being used to speedier sewing techniques I prefer the double pin method.

Another handy tip is to mark the end of the dart 1cm back from the point of the dart before you mark the dart onto the fabric. You’ll see the reason when we come to sew the dart.

File 15-08-2017, 15 45 40

Double pinning

Snip the ends of the legs of the dart as they sit on the edge of the garment.

File 15-08-2017, 15 45 29

File 15-08-2017, 15 45 12
Only very small snips mind, nothing that goes in too far to the seam allowance.

Poke a pin through the end of the dart (the new one, 1cm back from the original point) and then flip over the fabric and pattern.

File 15-08-2017, 15 44 52
I have made a hole at the new point to allow the pin head to go though the paper more easily.

Where you can see the pin is poking out from the underneath layer push another back through.

File 15-08-2017, 15 44 20

Carefully remove the pattern allowing the pin head to slip through the hole to mark the dart. Then when you remove the pattern and separate the layers of fabric a pin should remain in each piece marking the end of the dart.

File 15-08-2017, 15 43 53

You can use this method to mark any type of dart, but just be careful the pins don’t fall out before you’ve pinned the dart in place!

Pinning the dart

Pinch the fabric together creating a small pleat and match up the small snips at the edge of the fabric and pin vertically in together.

File 15-08-2017, 15 43 28

Follow the crease of the pleat until you reach the marker pin. Then remove and replace that pin vertically where it came out.

File 15-08-2017, 15 42 48

You can draw in the dart line if you choose with a fabric pen or tailors chalk.

File 15-08-2017, 15 42 35

Another handy hint is to use the tail of the starting threads to pull around and use as a guide once you’ve sewn a couple of stitches.

File 15-08-2017, 15 42 17
Pull off extra long tails of thread.
File 15-08-2017, 15 42 03
Use the threads to act as a guide for stitching the dart.

Sewing the dart

Starting at the edge of the fabric sew in towards the point of the dart. Now going back to what we mentioned earlier about the darts following the contours of the body, this now means that the dart we sew will be slightly curved and NOT a straight line. Admittedly it is subtle but it will make a difference to how the dart sits and fits over the body.

File 15-08-2017, 15 40 37
The sewing line sits in a very slight curve above the chalk line.

And marking the end of the dart 1cm back from the point also allows us to curve or “stitch into the dart” by extending the stitching line almost parallel to the edge of the fabric.

This reduces the angle that the sewing line hits the folded edge of the dart and means the end of dart will lay flat and not dimple. My old needlework teacher used to say “think hill not mountain”!

File 15-08-2017, 15 40 58
The stitching line gently curves into the fold of the dart creating a smooth line.

When you get to the end of the dart you can either run a few stitches off the fabric and then knot the ends – great for lightweight fabrics.

Or personally I prefer to drop the needle down, pivot the fabric around and sew back into the dart. This is quick and easy and won’t bulk out the end of the stitching too much.

File 15-08-2017, 15 41 50
Pivot at the end of the dart and sew back into the dart pleat.

Sewing a slightly curved off dart is just one of those things to practice. It is a good opportunity to get some scraps out and sew a dozen to get the hang of it. It’s like anything – the more you do the better you’ll get.

File 15-08-2017, 15 41 36

Pressing the dart

First of all it’s best to ‘set the stitches’ this just means pressing the dart as you’ve stitched it, so the stitches are pressed into the fabric and ‘set’. Do this from both sides of the dart.

File 15-08-2017, 15 37 50

Then press the dart from the right side over a tailor’s ham or if you don’t have one of those a tightly rolled towel will do.

File 16-08-2017, 16 28 06
Press carefully from the right side to allow the curve to remain in the dart.

Pressing carefully will help to eliminate those pesky dimples at the ends of the darts as well.

File 16-08-2017, 16 27 33
No unsightly dimples at the end of the dart.
File 16-08-2017, 16 26 57
From the wrong side you can see how the dart just comes to a neat point with no extra bulk.

This method of marking, sewing and pressing darts is certainly not the only way to do it, but I know it does give good results and sewing good darts is definitely worth getting right. It will give a much more professional look to your finished garments.

File 15-08-2017, 16 58 02

Happy dart sewing

Jules x

3 thoughts on “How to Sew Darts Without Dimples

  1. Jules this is brilliant; I’ve definitely picked up a couple of pointers here (pun intended!); love the trick of using the thread as a guide, curving slightly and back tracking – great stuff! X

  2. I’ve just sewn 6 darts; they’re not too pointy, but wish I’d read this beforehand! Next time…
    But doesn’t takes by the slightly curved line mean you are taking less fabric out in your dart?
    Happy sewing!

  3. Jules this was hands-down the BEST tutorial I’ve seen on sewing darts ever (and I’ve seen many videos, read in books, been instructed during in-person classes – uncountable times honestly). Thank you so much for this – I’m bookmarking it AND I’m going to practice your technique as you suggest too to get this right. I’m a big user of darts – I always have to do an FBA and add a dart even to knits (bust 36FF and waist 35) or I end up with a tent!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s