Making More of Your Patterns: A woven Peaseblossom

 

IMG_1632
Hark! I can hear the sewing machine calling!

I wanted to have a section on our blog that shows you how adaptable our pattern really are and to help with some suggestions as to the alterations and adaptations you can make at home.

After overhauling my wardrobe and clearing out what I don’t ACTUALLY wear I have focussed my mind on to the shapes and styles that I do wear more of and one is a boxy top that I can wear with jeans or wide trousers – otherwise known as a Peasblossom!

This is one of my favourites to make up in different fabrics. Now Peaseblossom is normally known as the draped or cowl neck top, but Version 2 of the pattern is just a round necked style.

My absolute favourite fabric is the laundered linen we have in the store, so what better combination!  Peaseblossom in linen!

 

A Bit of Pattern Hacking…

I did alter the pattern slightly as I wanted the top to be a more comfortable fit over my hips but not too big across my shoulders and around the neck as there will be no stretch in the fabric I’ve chosen for this project.

So I cut the size up from what I would normally cut – to make it roomier over the hips. But I closed the neckline slightly to make it a bit higher – I wanted it to have more of a traditional T shirt look.

IMG_1547

I then drew on a box pleat 2cm wide at the centre front and back to take the shoulders back down to my usual size. This would be made into an inverted box pleat.

The top needed a bit more interest at the hem so I decided to add a bit extra on to the hem to make it deeper and included a side split. The split needed a facing to neaten it off so that led me into thinking of including mitred corners. They give a neat and clean finish to corners on hems and look great if they are top-stitched as well. So I had to add a bit extra onto the pattern at the side seams as well.

 

This is what I did…

  • Drew on the original hem line
  • Added an extra 5cm on from the hem line
  • Drew on the side seam allowance
  • Added an extra 5cm onto the side from the seam line
  • Marked the split to end about 8cm or 3” from the finished hemlineWoven T pattern hack spilt.jpg

 

I wanted to sew the hem by top stitching 4cm away from the finished edge to give a border to the hem and split, I thought it would look quite neat to have the split sewn with a gable (or point) above it. So I drew on the top-stitching line and created a gable over the split so the point of the gable was 4cm above the end of the split. I could then trim off the excess paper to give me the shape I needed.

*  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *  *

Now For a Bit of Cutting Out…

That was the pattern alterations done so it needed cutting out and making up.

IMG_1522
Ooops! Missed the timer!

The centre front and centre back went on the fold of the fabric and as there were only 2 pieces, that was pretty darn quick!

 

And a Bit of Sewing At Last!

Basic Construction

Stitch down the inverted box pleat by 5cm on both the centre front and centre back 2cm away from the fold.

IMG_1550

Open out the pleat and press into place. Sew/baste across the top of the pleat to hold it in place. (Not shown because I forget to take a picture! Oops!)

IMG_1573

Neaten the side seams and hems on both front and back separately.

IMG_1551

Sew the shoulder seams and neaten.

IMG_1555

Sew down the side seams to the end of the split and press open.

IMG_1552

 

Hem and Split

Then I constructed the mitred corners and you can follow our tutorial on How to Sew Mitred Corners to do this.

IMG_1570

Once the corners were completed I gave myself some guidelines for the top-stitching. I started at the top of one of the split gables so it wouldn’t notice too much.

IMG_1572

The hem and splits once sewn need a really good press – use a pressing cloth and plenty of steam if you need to.

IMG_1574

Neckband

Although the body of the top is a woven fabric I wanted to use something with stretch around the neck and cuffs. Luckily I had a bit of navy bamboo viscose jersey in my stash that would do nicely.

Because I had raised the neckline I needed to re-measure it to work out the length of the neckband. I’ve only shown measuring halfway around the neck in the image as it’s easier to do this then double the measurement, rather than to try and accurately measure all the way around.

Mark on the seam allowance around the neckline. Then measure out from the seam line the width you wanted for the neckband, I’ve used 2cm here.

woven T hack neckband marking

Then I measured around the neckline 2cm away from the seamline. This will be the length of the neckband.

If you think about concentric circles we want the inside finished edge of the neck band to sit flat against the body and then the raw edges of it to stretch out to fit the woven edge of the neckline. So that’s why the neckband is shorter than the actual neckline.

The strips of neck band and cuffs are sewn across the short edges to create a circle and then pressed in half to create the double layer.

IMG_1576

IMG_1577

I have found the best way to sew on the neckband is to match up the centre backs and centre fronts on both the neckband and neckline and pin those with the right sides together.

IMG_1581

Then I use my little fingers and ring fingers to stretch out the neckband and hold it in place while my other fingers and thumbs manipulate the fabric and neckband into position.

IMG_1592.jpg

It can be a bit tricky at first, but it’s all just practice.

Overlock or machine stitch around the neckline. You can see from the image is that the inside edge is flat and the outer edge of the neckband is stretched out to fit the neckline. You can use the same method for attaching the cuffs.

IMG_1598

To keep it all neat and tidy I used a twin needle to topstitch around the neckline through the woven fabric and seam allowance.

IMG_1600

Give the neckband a gentle press to steam it into place if it’s stretched out a little bit in the sewing.

IMG_1599

I was really pleased with the way this particular hack turned out, and I’m planning another one already.

IMG_1604

Here Are Some of the Details…

This is a very straightforward Pattern Hack to achieve and I hope it shows how easy it is to adapt a pretty simple pattern to include a few interesting details.

If you decide to have a go let me know how you get on.

Jules x

Making More of Your Patterns: Peaseblossom Colour Block

img_0109The Peaseblossom T is a wardrobe staple and I have quite a few of them in different fabrics and various adaptations.

The simple boxy shape lends itself to colour blocking and this is an easy to follow tutorial to show you how to adapt the pattern.

img_0111

The front and back of the Top are basically the same shape so to make life easier you can transfer the lines from the front on to the back.

I have used a coloured pen to make it easier to see but when adapting patterns yourself you should always use a really sharp pencil to ensure you’re as accurate as possible.

Decide where you want the seam line to separate the two colours. This is really up to you and the proportions of colour you want to use. I have decided to have a horizontal seam 8cm down from the front neckline. But you could also use vertical seams as well.

peaseblossom-colour-block-pattern-hack-10011

Draw a line across the front at right angles to the centre front. It is very important to make sure that the new seam line hits the centre front at right angles.

peaseblossom-colour-block-pattern-hack-10012

peaseblossom-colour-block-pattern-hack-10013

The centre front or back is a line of symmetry, so imagine a mirror reflecting whatever is on one side on to the other. If the new seam line is slightly off 90° you could end up with a ‘peak’ or ‘valley’ in the middle of the new seam line.

Peak or valley lines with dotted lines as the true horizontal.

peaseblossom-colour-block-pattern-hack-10014

To make sure this doesn’t happen use a set square, quilter’s grid or specialist Patternmaster that has 90° lines on it to use as a guide.

peaseblossom-colour-block-pattern-hack-10015

Transfer the seam line on to the back.

Method 1 – Lay the front pattern piece on top of the back.

peaseblossom-colour-block-pattern-hack-10017

Use a tracing wheel to trace along the line and through to the back piece.

peaseblossom-colour-block-pattern-hack-10018

peaseblossom-colour-block-pattern-hack-10019

Lift off the front and there will be the tiny prick marks made by the tracing wheel.  I have tried to show these but they are really too small.

peaseblossom-colour-block-pattern-hack-10021

Use these to draw in the new seam line.

Method 2 – If the paper is thin enough lay the back over the front so you can just see the new seam line on the front through the paper of the back. Or you can mark the centre front point and the sleeve point and just join the two dots.

peaseblossom-colour-block-pattern-hack-10022

Double check that the new seam line on the back hits the centre back at a right angle by using a ruler with 90° lines on it to use as a guide.

peaseblossom-colour-block-pattern-hack-10023

Separate the back pattern pieces and the front pieces by cutting up the new seam lines.

peaseblossom-colour-block-pattern-hack-10024

Add seam allowance on each side of the new seam lines. Add a strip of paper to each side of the new seam lines.

peaseblossom-colour-block-pattern-hack-10025

The seam allowance on the Peaseblossom is 1cm so you can either continue with the same or if you prefer to use a larger seam allowance add 1.5cm.

peaseblossom-colour-block-pattern-hack-10027

You can use the grading lines on a Patternmaster or quilter’s grid to make sure the seam allowance is parallel to the stitching line.

peaseblossom-colour-block-pattern-hack-10028

Add in balance marks (also called notches). Match up the two front pieces with each other and add in a single balance mark or notch. This will ensure that the two pieces match up correctly when sewn together.

peaseblossom-colour-block-pattern-hack-10029

Do the same for the two back pieces but use a double balance mark or notch to indicate that this is the back.

peaseblossom-colour-block-pattern-hack-10031

**In pattern notation a single notch is always used for the front and a double notch for the back.

The pattern pieces are now ready to cut out and make up in your chosen fabrics.

peaseblossom-colour-block-pattern-hack-10032

This is a really easy pattern hack to do just remember to keep an eye on those right angles.

If you are making your top from a woven fabric have a look at our How to Sew a Clean Finish Binding tutorial it gives a really neat finish to the neckline.

Happy sewing!