Sewing the Desdemona pocket
We have used this pocket on our Desdemona Skirt pattern- its an unusual style patch pocket with has an opening at the top – the button & buttonhole is just a design feature. Its simple to do but looks quite impressive (or so we think!)
You will need two pattern pieces- one pocket and one pocket facing. Our pocket piece is 21.5cm (width) x 23cm at the sides and 34cm at the centre. Draw a fold line 4cm down from the sides and pop your grain line on. The pocket facing is the same shape but the sides are 13cm in length. I chose to add further interest to this pocket by using the stripes vertically on the pocket and horizontally on the pocket facing.
Interface the pocket facing piece by attaching a light weight interfacing to the back. This will support the fabric later when you make a a buttonhole. Neaten the bottom edge of the pocket facing, then place it on top of the pocket piece with right sides together. Sew around the facing, pivoting at the corners. Trim the corners and turn through the right way around.
Press under the remaining seam allowance and mitre the corners. To do this press the seam allowances along the side and the bottom, open out and then fold the corner in so the point of the crease is on the edge. Then fold back in the side and the bottom and press again. Top stitch across the bottom edge of the facing to hold in place.
Mark and sew the buttonhole. Fold the point over along the fold line (marked on your pattern) and mark and sew the button in place. You could cheat and just sew a button on here as its a decorative feature and not a usable button/ button hole.
Place and pin the pocket onto your skirt, making sure its in the right place for your length of arms! Lift the edges of the point of the pocket to be able to start and finish sewing along the edge of the pocket to hold it in place. You can reinforce the pocket at the corners by sewing a triangle or rectangle at the start and finish points.